About this tool
The down payment is the part of the purchase price you pay from your own money; the mortgage covers the rest. A larger down payment means a smaller loan, a lower monthly payment and less interest, and it can remove the need for mortgage insurance. A smaller one gets you into a home sooner but costs more each month.
Lenders look at the loan-to-value ratio (LTV), the loan as a share of the property value. In the United States, 20% down (80% LTV) is the usual point at which conventional loans no longer need PMI, while many programs accept much less. Rules differ from country to country, so check the minimums and insurance requirements that apply where you buy.
How it works
Enter the home price and the down payment, either as a percentage of the price or as an amount; switching between the two keeps the same down payment. The calculator works out the loan amount, the loan-to-value ratio, the closing costs as a percentage of the price and the cash you need at closing. With an interest rate and a term, it also shows the monthly principal and interest.
If the down payment is less than 20% of the price, a conventional loan in the United States usually requires private mortgage insurance (PMI). The calculator estimates PMI from the annual rate you enter, shows how much more you would need to put down to avoid it and when the scheduled balance falls to 80% and 78% of the price. Add your current savings, a monthly saving amount and an expected return to see how long it takes to save the cash you need.
Example
A 400,000 home with 10% down needs a down payment of , so the loan is 360,000 and the LTV is 90%. Closing costs of 3% add , so you need 52,000 in cash at closing.
At 6.5% over 30 years, principal and interest come to about 2,275 a month. With PMI at 0.5% a year, a month is added until the balance falls far enough. Another 40,000 down would remove PMI. With 10,000 already saved and 1,000 saved each month at a 4% return, you reach the 52,000 in 39 months, about 3 years and 3 months.
Minimum down payments in the United States
Typical US minimums by loan type (primary home)
| Loan type | Minimum down | Notes |
|---|---|---|
| Conventional | 3% | Fannie Mae and Freddie Mac programs for eligible buyers; PMI under 20% |
| FHA | 3.5% | Credit score 580 or higher (10% from 500 to 579); mortgage insurance premium |
| VA | 0% | Eligible veterans and service members; funding fee |
| USDA | 0% | Eligible rural areas and income limits; guarantee fee |
| Jumbo | 10% | Loans above conforming limits; many lenders ask for 10% to 20% |
These are US program rules as of 2026 and lenders may require more. In other countries, minimum deposits, mortgage insurance and loan-to-value limits are set by local lenders and regulators, so check the rules where you buy.
Assumptions and limits
The monthly payment shown covers principal, interest and an estimated PMI premium only; property tax, homeowners insurance and HOA fees come on top, so use the mortgage calculator for the full payment. PMI rates depend on your credit score, the LTV and the insurer, and typically range from about 0.3% to 1.5% of the loan a year. Closing costs vary widely by location and lender.
The program minimums in the table describe common US loan types and change over time; lenders can require more. Outside the United States, deposit rules, mortgage insurance and lending limits are set nationally, so treat the US figures as an example only. This calculator is a planning tool, not a loan offer or financial advice.
Frequently asked questions
How much should I put down on a house?
Put down as much as you can without draining your emergency fund. In the United States, 20% avoids PMI on a conventional loan, but many buyers put down 3% to 10% and accept the insurance cost. Compare the monthly payment and the cash to close for several down payments in the table before you decide.
What is the minimum down payment?
In the United States, conventional loans can start at 3% for eligible buyers, FHA loans at 3.5% with a credit score of 580 or higher, and VA and USDA loans can require no down payment. In other countries the rules are different: many lenders lend up to 80% to 90% of the value, and some regulators set minimum deposits by law.
How is PMI calculated and when does it stop?
PMI is usually quoted as an annual percentage of the loan, paid monthly: a month. On conventional US loans you can ask to cancel it once the balance reaches 80% of the original value, and it must end automatically at 78% under the Homeowners Protection Act, if your payments are current.
Are closing costs part of the down payment?
No. Closing costs are separate fees for the loan, title, appraisal, taxes and similar items, often 2% to 5% of the price. You need both the down payment and the closing costs in cash, unless the seller or lender covers part of them.
How long will it take to save for a down payment?
Enter your current savings, the amount you can save each month and an expected return. The calculator adds a deposit each month, compounds the return monthly and counts the months until you reach the cash needed at closing. A higher monthly saving shortens the time much more than a slightly higher return.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
currency | ISO 4217 code, for example USD or EUR | your saved or detected currency |
home_priceHome price | amount without a currency symbol; allowed 1000–1000000000 | required |
down_payment_pctDown payment | percent: 6.5 means 6.5%; allowed 0 – < 100 | required |
down_paymentDown payment | amount without a currency symbol; allowed 0–1000000000 | required |
closing_costs_pctClosing costs | percent: 6.5 means 6.5%; allowed 0–15 | default 3 |
interest_rate_pctInterest rate | percent: 6.5 means 6.5%; allowed 0–25 | required |
term_yearsLoan term | one of: 10, 15, 20, 30 | default 30 |
pmi_rate_pctPMI rate per year | percent: 6.5 means 6.5%; allowed 0–3 | default 0.5 |
savedSaved so far | amount without a currency symbol; allowed 0–1000000000 | optional |
saving_monthlySaving per month | amount without a currency symbol; allowed 0–1000000000 | optional |
savings_return_pctExpected return per year | percent: 6.5 means 6.5%; allowed 0–25 | optional |
Examples
?home_price=550000&down_payment_pct=12&interest_rate_pct=6.25?currency=EUR&home_price=320000&down_payment=40000&interest_rate_pct=4.1&term_years=20&saved=15000&saving_monthly=900
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="down-payment"]