About this tool
The Repayment Assistance Plan (RAP) is the income-driven plan created by the 2025 reconciliation law (Public Law 119-21). It opened on July 1, 2026. Your payment is 1% to 10% of your adjusted gross income, depending on the income band, minus $50 a month for each dependent, and never less than $10.
A court order ended the SAVE plan in March 2026. Loan servicers began sending SAVE borrowers 90-day notices on July 1, 2026 and will reach every SAVE borrower before the end of 2026. If you do not pick a plan by the final deadline, you are placed in the Standard plan, or in the Tiered Standard plan if you have a loan made on or after July 1, 2026 that has entered repayment. This calculator puts RAP next to those plans and next to IBR, so you can compare them before you choose.
How the RAP payment is calculated
Start from your AGI. Up to $10,000 the yearly base payment is a flat $120. Above that, each $10,000 band adds a percentage point: 1% of AGI for $10,001–$20,000, 2% for $20,001–$30,000, and so on up to 10% for AGI over $100,000. The percentage applies to your whole AGI, not just the part inside the band. Divide the base by 12 and subtract $50 for each dependent you claim on your tax return. If the result is under $10, you pay $10.
Married borrowers who file jointly use the AGI on the joint return. If your spouse also has federal loans, one payment is worked out for the couple and split by each spouse's share of the combined balance, with a $10 minimum each. If you file separately, only your own AGI and the dependents on your own return count.
Every on-time payment goes to interest first. If it does not cover the month's interest, the rest is not charged, so your balance never grows on RAP. If the payment reduces your principal by less than $50, the Education Department adds a matching principal payment up to $50, but never more than you paid that month. Once you have made 360 qualifying payments (30 years), any balance left is cancelled.
Who can use RAP, IBR and the Tiered Standard plan
RAP is open to Direct Subsidized and Unsubsidized Loans, Direct PLUS Loans for graduate or professional students and Direct Consolidation Loans that did not repay a parent PLUS loan. FFEL, Perkins and other older loans qualify once you consolidate them into a Direct Consolidation Loan. Parent PLUS loans, and consolidation loans that repaid one, cannot use RAP.
If you receive any Direct Loan on or after July 1, 2026, you can only choose RAP or the Tiered Standard plan, for all your Direct Loans. The Tiered Standard plan has a fixed payment of at least $50 over 10 years if your total Direct Loan balance is under $25,000, 15 years under $50,000, 20 years under $100,000 and 25 years from $100,000.
If all your loans were made before July 1, 2026, you can also choose IBR, or the Standard, Graduated and Extended plans. IBR takes 15% of the income above 150% of the poverty guideline for your household size and state, or 10% if you had no federal loan balance on July 1, 2014. It never asks for more than the 10-year Standard payment, and forgives the rest after 25 years, or 20 years at the 10% rate. Unlike RAP, interest your IBR payment does not cover stays on your account. PAYE and ICR close no later than July 1, 2028.
Example
A single borrower with $45,000 AGI, no dependents and $30,000 of loans at 6.5% is in the 4% band: dollars a month. The first month's interest is , so $12.50 is waived and the $150 payment reduces no principal; the match adds $50. Over the first year that comes to $132.13 of interest waived and $600 of principal matched. On IBR at 10% the same borrower pays dollars, and the 10-year Standard plan costs $340.65.
A married couple filing jointly with $81,000 AGI and two children is in the 8% band: dollars a month. On IBR at 15%, with a household of four in the 48 states, the payment is dollars.
Frequently asked questions
The SAVE plan ended. What do I have to do?
Watch for your servicer's notice, titled "You Have 90 Days to Select a New Repayment Plan". You then have 90 days to choose a plan you are eligible for, then a final 30-day notice. If you still do nothing, you are moved to the Standard plan, or to the Tiered Standard plan if you have a loan made on or after July 1, 2026 that has entered repayment. Both can cost far more a month than an income-driven plan. You can apply for RAP or IBR on StudentAid.gov at any time.
Who counts as a dependent for RAP?
Someone who is your dependent under section 152 of the tax code and whom you claim on your federal tax return. On a joint return that means the dependents on the joint return; if you file separately, only the dependents on your own return count. IBR uses household size instead, which also counts you, a spouse on a joint return and others who get more than half their support from you.
How are married couples who file jointly treated?
RAP uses the AGI on the joint return. When both spouses have eligible federal loans, the Education Department works out one payment from the combined income and splits it by each spouse's share of the couple's balance. The 2026 regulations give an example: two borrowers with $55,000 AGI combined and $20,000 of loans each owe $229 a month together, not $229 each. IBR splits the payment the same way.
Do RAP payments count toward Public Service Loan Forgiveness?
Yes. The 2025 law added on-time RAP payments to the payments that qualify for PSLF. This calculator does not model PSLF; it shows forgiveness after 360 RAP payments, or 20 or 25 years of IBR.
Why might my servicer's figure differ?
Your servicer uses each loan's own rate and balance, the AGI on file (or other proof of income), your dependents for the year and the poverty guideline in force when you recertify. The projection here holds dependents, household size and one average interest rate steady, adds interest monthly and caps IBR at the 10-year payment on today's balance. Use StudentAid.gov's Repayment Calculator with your account for an official quote.
Sources
- Public Law 119-21, section 82001 — Repayment Assistance Plan (HEA §455(q)), Tiered Standard plan (§455(d)(7)) and IBR changes (§493C)
- U.S. Department of Education — final regulations of May 1, 2026 (91 FR 23768), 34 CFR 685.208 and 685.209
- 20 U.S.C. 1098e — income-based repayment (IBR), as amended
- HHS — 2026 poverty guidelines (Federal Register, January 15, 2026)
- Federal Student Aid — SAVE Plan borrowers: choosing a different repayment plan (October 2026)
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
borrower_typeYour federal loans | one of: new_2026, since_2014, before_2014 | default since_2014 |
filing_statusTax filing status | one of: single, joint, separate | default single |
agiAdjusted gross income (AGI) | amount without a currency symbol; allowed 0–10000000 | required |
dependentsDependents on your return | whole number; allowed 0–20 | counted as 0 |
loan_balanceYour federal student loan balance | amount without a currency symbol; allowed 1–2000000 | required |
spouse_loan_balanceYour spouse's federal loan balance | amount without a currency symbol; allowed 0–2000000; used with filing_status = joint | counted as 0 |
interest_rate_pctInterest rate | percent: 6.5 means 6.5%; allowed 0–20 | required |
income_growth_pctYearly income growth | percent: 6.5 means 6.5%; allowed 0–15 | counted as 0 |
family_sizeHousehold size (IBR) | whole number; allowed 1–30; used with borrower_type = since_2014, before_2014 | calculated by the tool |
stateState (IBR poverty guideline) | one of: contiguous, alaska, hawaii; used with borrower_type = since_2014, before_2014 | default contiguous |
Examples
?borrower_type=since_2014&filing_status=single&agi=45000&loan_balance=30000&interest_rate_pct=6.5?borrower_type=before_2014&filing_status=joint&agi=81000&dependents=2&loan_balance=40000&interest_rate_pct=6?borrower_type=new_2026&filing_status=single&agi=52000&dependents=1&loan_balance=60000&interest_rate_pct=6.39&income_growth_pct=3?borrower_type=since_2014&filing_status=joint&agi=55000&loan_balance=20000&spouse_loan_balance=20000&interest_rate_pct=5.5?borrower_type=since_2014&filing_status=separate&agi=38000&dependents=1&family_size=3&state=alaska&loan_balance=25000&interest_rate_pct=5
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="rap"]