Normal Distribution Calculator

Your values

Find

Only need a z-score or percentile? Use the z-score calculator.

Result

P(X < 130)

Normal distribution curveShaded area: 97.72% of the distribution.
P(X > 130)
Z-score

Step by step

  1. Convert to a z-score
    z=130−10015=2z=\frac{130-100}{15}=2
  2. Read the area under the standard normal curve
    P(X<130)=Φ(2)≈0.97725P(X<130)=\Phi(2)\approx0.97725

About this tool

The normal distribution is the symmetric, bell-shaped curve that describes many measurements: heights, test scores, measurement errors and, by the central limit theorem, averages of large samples. It is fixed by two numbers, the mean μ\mu at its centre and the standard deviation σ\sigma that sets its width.

Use this calculator to find the share of a normal distribution that lies below, above or between values, without a z-table, or to find the cut-off value for a given probability. If you only need a z-score or a percentile for a single value, the z-score calculator is quicker.

How it works

Enter the mean μ\mu and standard deviation σ\sigma of the normal distribution. Then choose what you want: the probability below a value, above a value or between two values, or the inverse, which finds the value for a given probability.

The calculator converts each value to a z-score with z=(x−μ)/σz = (x - \mu)/\sigma, reads the area from the standard normal distribution Φ\Phi and shades it on the bell curve. For the inverse it works backwards: it finds the z-score for your probability and converts it with x=μ+zσx = \mu + z\sigma. Choose a central area to get the symmetric interval around the mean that holds that share of the distribution.

P(a<X<b)=Φ(b−μσ)−Φ(a−μσ)P(a<X<b)=\Phi\left(\frac{b-\mu}{\sigma}\right)-\Phi\left(\frac{a-\mu}{\sigma}\right)

Example

IQ scores are designed to follow a normal distribution with μ=100\mu = 100 and σ=15\sigma = 15. A score of 130 has z=(130−100)/15=2z = (130 - 100)/15 = 2, so P(X<130)=Φ(2)≈0.97725P(X < 130) = \Phi(2) \approx 0.97725: about 97.7 % of people score below 130 and about 2.3 % above it.

Between 85 and 115, one standard deviation either side of the mean, lies Φ(1)−Φ(−1)≈0.6827\Phi(1) - \Phi(-1) \approx 0.6827, or about 68 %. In the other direction, the score that only 5 % exceed is x=100+1.6449×15≈124.67x = 100 + 1.6449 \times 15 \approx 124.67.

Assumptions and limits

Results are exact for a true normal distribution, but real data are only approximately normal. Skewed data, heavy tails, small samples or values with natural limits (such as incomes or waiting times) can make tail probabilities misleading, especially far from the mean.

For a continuous distribution the probability of any single exact value is 0, so P(X<x)P(X < x) and P(X≤x)P(X \le x) are the same. For counts, such as a binomial approximation, apply a continuity correction of 0.5 before entering the value.

Frequently asked questions

How do I find the probability between two values?

Convert both values to z-scores and subtract the areas: P(a<X<b)=Φ(zb)−Φ(za)P(a < X < b) = \Phi(z_b) - \Phi(z_a). Choose the P(a < X < b) mode and enter a and b; the calculator does both steps and shades the area.

What is the 68-95-99.7 rule?

In a normal distribution about 68.27 % of values lie within one standard deviation of the mean, 95.45 % within two and 99.73 % within three. It is a quick check on any result from this calculator.

How do I find the value for a given percentile?

Choose the inverse mode with a left-tail area and enter the percentile as a probability, for example 0.90 for the 90th percentile. The calculator finds z=Φ−1(0.90)≈1.2816z = \Phi^{-1}(0.90) \approx 1.2816 and returns x=μ+zσx = \mu + z\sigma.

How is this different from the z-score calculator?

The z-score calculator standardizes one value and gives its percentile. This calculator works directly on your scale with areas: below, above, between two values, outside an interval and inverse probabilities, all shown on a bell curve.

Is the standard normal distribution included?

Yes. Enter a mean of 0 and a standard deviation of 1, and the values you enter are z-scores.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
modeFindone of: below, above, between, inversedefault below
meanMean (μ)numberrequired
sdStandard deviation (σ)number; allowed > 0required
xValue (x)number; used with mode = below, aboverequired
lowerLower value (a)number; used with mode = betweenrequired
upperUpper value (b)number; used with mode = betweenrequired
areaAreaone of: below, above, central; used with mode = inversedefault below
probabilityProbabilitynumber; allowed > 0 – < 1; used with mode = inverserequired

Examples

  • ?x=120&mean=100&sd=15
  • ?mode=above&x=1.5&mean=0&sd=1
  • ?lower=70&upper=130&mean=100&sd=15
  • ?probability=0.9&area=central&mean=100&sd=15

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="normal_distribution_calculator"]