About this tool
The recipe scaler multiplies every ingredient quantity by the same factor so a recipe serves a different number of people. Home cooks, bakers, and caterers use it when doubling a batch, cutting a recipe in half, or cooking for a crowd. The scaling factor is the desired number of servings divided by the original number of servings, and every quantity is multiplied by that factor.
How it works
Enter how many servings the original recipe makes and how many you want. In the ingredients box, write one ingredient per line as name, quantity and unit separated by vertical bars, for example Butter | 1 1/2 | tbsp. Quantities can be whole numbers, decimals with a dot, fractions such as 3/4 or mixed numbers such as 1 1/2.
The calculator divides the target servings by the original servings to get one multiplier, then applies it to every line. Units are copied unchanged, so grams stay grams and cups stay cups. The table lists the scaled quantities as decimals, which you can round to amounts your measuring spoons and scales can handle.
Example
The default recipe serves 4 people, and the target is 6 servings. The recipe multiplier is . Each ingredient is multiplied by 1.5 while its unit stays the same: Flour at 100 g becomes 150 g, and Milk at 0.5 L becomes 0.75 L. Enter each ingredient on its own line as name, quantity, and unit separated by vertical bars, for example Flour | 100 | g. Quantities such as 1/2 or 1 1/2 are accepted.
Assumptions and limits
Scaling is purely proportional. The tool does not convert units, round to practical kitchen measures, or adjust pan size, cooking time, or oven temperature. It accepts up to 100 ingredient lines, and each line needs a name, a quantity, and a unit.
Frequently asked questions
How do you scale a recipe up or down?
Divide the number of servings you want by the number the recipe makes, then multiply every ingredient by that result. Going from 4 to 6 servings uses a factor of 1.5; going from 4 to 2 uses 0.5. Because the same factor applies to every ingredient, the proportions of the dish stay the same.
Do I need to change the baking time when I double a recipe?
Often, but not in proportion to the amount. Time depends mostly on the depth and size of the pan, so a deeper or larger batch usually needs longer at the same temperature. Check for doneness rather than multiplying the time. If you split a doubled batter into two pans of the original size, the original time is usually a good starting point.
What do I do when the scaled amount is an awkward number, like 1.5 eggs?
Round to a practical amount or measure by weight. For eggs, you can beat an egg and use part of it; a large egg is commonly treated as about 50 g without the shell. For ingredients counted in whole units, such as eggs or cans, it can be simpler to choose a target serving count that gives a whole multiplier.
Can I scale seasonings the same way as other ingredients?
The math is the same, but many cooks add strong seasonings, salt, and spices gradually when scaling a recipe up a lot, then adjust to taste. A practical approach is to add a little less than the scaled amount first and the rest after tasting.
Can I scale a recipe that uses cups and fractions?
Yes. Enter quantities as they appear, such as Sugar | 3/4 | cup or Oats | 1 1/2 | cup, and keep the unit in the third column. Scaling 1 1/2 cups by a factor of 1.5 gives 2.25 cups, which is 2 1/4 cups. The tool does not convert cups to grams, so use a separate conversion if you prefer to weigh.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
original_servingsOriginal servings | number; allowed > 0 | required |
target_servingsDesired servings | number; allowed > 0 | required |
| Parameter | Value | If omitted |
|---|---|---|
ingredient1_nameIngredient | text; your own text; Copy link includes it | required |
ingredient1_quantityQuantity | fraction or decimal: 3/4, 1 1/2 or 0.75 | required |
ingredient1_unitUnit | text; your own text; Copy link includes it | required |
Examples
?original_servings=4&target_servings=10&ingredient1_name=Flour&ingredient1_quantity=250&ingredient1_unit=g&ingredient2_name=Butter&ingredient2_quantity=1%201/2&ingredient2_unit=tbsp?original_servings=6&target_servings=2&ingredient1_name=Brown+sugar&ingredient1_quantity=3/4&ingredient1_unit=cup
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="recipe_scaler"]