Dice Roller

Choose your dice
Roll rule

Add every die, then apply the modifier once. Roll 1–100 dice with 2–1,000 sides each.

Tabletop presets

Rolls happen in your browser. Results and history are not saved or sent to a server.

Latest roll

1d6

Choose your dice, then roll to see the results

About this tool

This dice roller rolls one or more virtual dice, including d4, d6, d8, d10, d12, d20, d100 or a custom number of sides, adds a modifier and shows every die and the total. Tabletop role-playing and board game players use it when physical dice are not available. Dice notation NdS+M means rolling N dice with S sides each and adding M to the sum.

The roller also handles the rules that make dice tricky to simulate by hand, such as keeping the higher of two d20s or dropping the lowest of four d6. Each die is shown separately, with discarded dice crossed out, so everyone at the table can check how the total was reached.

How it works

Choose a standard die or enter a custom number of sides, set the dice count and optional modifier, then select Roll dice. Presets change the settings without rolling. Advantage keeps the higher of two dice; disadvantage keeps the lower. The ability-score preset rolls 4d6 and drops one lowest die. Reset clears the settings and roll history.

You can roll up to 100 dice at once, with 2 to 1,000 sides per die and a modifier between −1,000 and +1,000. The presets cover 2d6 for board games, 3d6, 4d6 drop lowest, a single d20 check, d20 advantage and disadvantage, and a percentile d100. The notation of each roll, such as 2d20kh1+5, appears with the result, and the last ten rolls stay in the history until you reset or reload.

Example

For 2d6 with a +3 modifier, dice showing 4 and 5 give a total of 12. For 4d6 drop lowest, rolls of 2, 4, 4, and 6 discard the 2 for a total of 14. Repeat the ability-score preset for each score your game needs.

Totals from several dice are not equally likely. With 2d6 there are 36 equally likely combinations, and 6 of them add up to 7, so 7 comes up one time in six. A total of 2 or 12 needs a single combination each, so each has a chance of only 1 in 36, which is why board games often reward rolling them.

Assumptions and limits

Rolls are software-generated, not simulated physics. The tool supports one dice group per roll with an optional modifier, advantage, disadvantage and drop-lowest rules; it does not parse mixed expressions such as 2d6+1d8, exploding dice or rerolls. History keeps the last ten rolls and clears on reset or reload.

Frequently asked questions

How are the dice randomized?

This tool reuses our random-number generator. It uses the browser's Web Crypto random values with rejection sampling to avoid modulo bias when available, or falls back to Math.random. Each die is independent, so repeated values are normal. This tool is for casual games, not regulated gambling.

What do d100, kh1, kl1, and dl1 mean?

NdS means N dice with S sides. d100 gives a value from 1 to 100, not 0 to 99. kh1 keeps one highest die, kl1 keeps one lowest die, and dl1 drops one lowest die. A modifier is applied once after the roll rule, and negative totals are allowed.

What is the average roll on a die?

For a fair die with S sides, the average is (S+1)/2 (S + 1)/2 . A d6 averages 3.5 and a d20 averages 10.5; for several dice, multiply by the number of dice and then add the modifier. So 3d6+2 averages 3×3.5+2=12.5 3 \times 3.5 + 2 = 12.5 .

How does advantage change the odds on a d20?

Rolling two d20s and keeping the higher raises the average from 10.5 to about 13.8. For example, the chance of rolling 11 or higher rises from 50% to 75%. Disadvantage works the other way, lowering the average to about 7.2 and the chance of 11 or higher to 25%.

Can I roll unusual dice such as a d3 or d7?

Yes. Enter any whole number of sides from 2 to 1,000 in the sides field, and each face from 1 up to that number has an equal chance. A d2 works as a coin, and a d3 or d7 covers rules that physical dice sets do not include.

Dice artwork (adapted):DiceFont — Franco Ponticelli(CC BY 3.0).

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
ruleRoll ruleone of: sum, advantage, disadvantage, drop_lowestdefault sum
countNumber of dicewhole number; allowed 1–100default 1
sidesSides per diewhole number; allowed 2–1000default 6
modifierModifierwhole number; allowed -1000–1000default 0

Examples

  • ?count=4&sides=6&rule=drop_lowest
  • ?sides=20&rule=advantage&modifier=5

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="dice"]