Heat Index Calculator

View results · 100 °F

Inputs

Temperature unit
Humidity given as

Use the air temperature in the shade and the relative humidity or dew point from a weather report. Full sunshine can make it feel up to 15 °F (8 °C) hotter.

Result

Heat index
Heat index (°C)
38 °C
Dew point
74.3 °F
Difference from the air temperature
9.7 °F

NWS category: Extreme caution

  • Caution80 °F – 90 °F · Fatigue possible with prolonged exposure and/or physical activity
  • Extreme caution90 °F – 103 °F · Heat stroke, heat cramps or heat exhaustion possible with prolonged exposure and/or physical activity
  • Danger103 °F – 124 °F · Heat cramps or heat exhaustion likely, and heat stroke possible with prolonged exposure and/or physical activity
  • Extreme danger≥ 125 °F · Heat stroke highly likely
HI=HIR(90, 60)≈99.7 ∘F\text{HI}=\text{HI}_{\text{R}}(90,\,60)\approx99.7\,{}^{\circ}\text{F}

Calculated with the Rothfusz regression used by the National Weather Service.

About this tool

The heat index, often called the apparent or feels-like temperature, combines air temperature and relative humidity to estimate how hot it feels to the human body in the shade. Humid air slows the evaporation of sweat, the body's main way of cooling down, so 90 °F (32 °C) at 60% humidity feels like about 100 °F (38 °C).

The National Weather Service uses the heat index to issue heat advisories and warnings, and its four categories, from Caution to Extreme Danger, describe the growing risk of heat cramps, heat exhaustion and heat stroke during prolonged exposure or physical activity.

How it works

Enter the air temperature and either the relative humidity or the dew point; the calculator works in °F or °C and converts the values you entered when you switch. The heat index appears immediately with its National Weather Service category.

Following the NWS procedure, the calculator first applies Steadman's simple formula HI=0.5 (T+61+1.2 (T−68)+0.094 RH)\text{HI} = 0.5\,(T + 61 + 1.2\,(T - 68) + 0.094\,\text{RH}) in °F. If that result is 80 °F or more, it uses the Rothfusz regression instead and then applies the NWS corrections: it subtracts an adjustment when the humidity is below 13% at 80–112 °F and adds one when the humidity is above 85% at 80–87 °F.

HI=−42.379+2.04901523 T+10.14333127 R−0.22475541 TR−0.00683783 T2−0.05481717 R2+0.00122874 T2R+0.00085282 TR2−0.00000199 T2R2\begin{aligned}\text{HI}={}&-42.379+2.04901523\,T+10.14333127\,R-0.22475541\,TR\\&-0.00683783\,T^2-0.05481717\,R^2+0.00122874\,T^2R\\&+0.00085282\,TR^2-0.00000199\,T^2R^2\end{aligned}

Example

At 90 °F (32.2 °C) and 60% relative humidity, the simple formula gives 0.5 (90+61+1.2×22+0.094×60)≈91.50.5\,(90 + 61 + 1.2 \times 22 + 0.094 \times 60) \approx 91.5 °F, which is above 80 °F, so the Rothfusz regression applies: HI≈99.7\text{HI} \approx 99.7 °F, or about 100 °F (37.6 °C). That is in the Extreme Caution category.

At 100 °F with only 10% humidity, the regression gives about 94.8 °F and the dry-air adjustment of 13−10417−517≈0.63\frac{13 - 10}{4}\sqrt{\frac{17 - 5}{17}} \approx 0.63 °F lowers it to about 94.1 °F.

Heat index tables

National Weather Service heat index categories

CategoryHeat index (°F)Heat index (°C)Possible effects
Caution80 – 9027 – 32Fatigue possible with prolonged exposure and/or physical activity
Extreme caution90 – 10332 – 39Heat stroke, heat cramps or heat exhaustion possible with prolonged exposure and/or physical activity
Danger103 – 12439 – 51Heat cramps or heat exhaustion likely, and heat stroke possible with prolonged exposure and/or physical activity
Extreme danger≥ 125≥ 52Heat stroke highly likely

Heat index (°F) by air temperature and relative humidity

Air temperature (°F)40%50%60%70%80%90%100%
8080818283848689
8281838486899296
84838588909498104
8685889195100105112
88889195100106113121
909195100106113122132
929499105112121131—
9497103110119129——
96101108116126———
98105113123134———
100109118129————
102114124137————
104119131—————
106124——————
108130——————
110136——————

Values are rounded to whole degrees. As on the NWS chart, results above 137 °F (58 °C) are not shown because they lie outside the range of Steadman's table.

Assumptions and limits

The heat index assumes shade, a light breeze and an adult of average size. Direct sunshine can raise it by up to 15 °F (8 °C), while strong wind, clothing, fitness, age and acclimatization change how heat actually affects a person. The Rothfusz regression was fitted to Steadman's table and is less reliable at very high temperatures or humidity; values above about 137 °F (58 °C) are beyond that table.

The NWS categories are general guidance, not medical advice. Follow local heat warnings, and seek medical help for signs of heat stroke such as confusion, a very high body temperature or loss of consciousness.

Frequently asked questions

What is the heat index?

It is the temperature the air feels like to the human body when humidity is taken into account. High humidity slows the evaporation of sweat, so the body cools less effectively and it feels hotter than the thermometer shows.

What heat index is dangerous?

The National Weather Service uses four categories: Caution at 80–90 °F (27–32 °C), Extreme Caution at 90–103 °F (32–39 °C), Danger at 103–124 °F (39–51 °C) and Extreme Danger at 125 °F (52 °C) or higher.

How do I calculate the heat index in Celsius?

The NWS equations work in degrees Fahrenheit. Convert the temperature with TF=1.8 TC+32T_F = 1.8\,T_C + 32, calculate the heat index and convert back with TC=(TF−32)/1.8T_C = (T_F - 32)/1.8. The calculator does this for you when you choose °C.

Why is the heat index lower than the air temperature?

In very dry air, sweat evaporates quickly and cools the body efficiently, so hot dry air can feel slightly cooler than the thermometer reading. The NWS low-humidity adjustment reflects this.

Can I use the dew point instead of relative humidity?

Yes. Choose Dew point under Humidity given as. The calculator converts the dew point to relative humidity with the Magnus formula and then calculates the heat index.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
unitsmetric or imperialset by the first measured value
temperature_ctemperature_fAir temperaturenumber; any unit in the name: _c, _f, _krequired
humidity_pctRelative humiditypercent: 6.5 means 6.5%; allowed > 0 – 100required
dew_point_cdew_point_fDew pointnumber; any unit in the name: _c, _f, _krequired

Examples

  • ?temperature_f=95&humidity_pct=55
  • ?temperature_c=34&dew_point_c=24

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="heat-index"]