Electricity Cost Calculator

Enter average appliance power, daily hours, days and your price per kWh. The estimate uses constant power and excludes fixed charges and time-of-use tariffs.

Results

Enter your values and select Calculate.

C=P1000h d rC=\frac{P}{1000}h\,d\,r

About this tool

This electricity cost calculator estimates the energy an appliance uses and what it costs to run over a number of days. It helps when comparing appliances, budgeting for a space heater or checking an unexpectedly high bill. Energy is measured in kilowatt-hours: one kilowatt-hour (kWh) is the energy used by a 1,000-watt device running for one hour. Multiplying kilowatt-hours by your price per kWh gives the cost.

How it works

Enter the appliance's average power in watts, how many hours a day it runs, the number of days and your electricity price per kWh from your bill. Hours can include fractions, so 30 minutes a day is 0.5.

The calculator divides watts by 1,000 to get kilowatts, multiplies by hours per day and by days to get kilowatt-hours, and multiplies that by your price. To compare two appliances, keep the hours and days the same for both and compare the costs. The result is in whatever currency your price per kWh uses.

C=P1000h d rC=\frac{P}{1000}h\,d\,r

Example

The default inputs describe a 1,500 W appliance used 2 hours a day for 30 days at a price of 0.25 per kWh. First convert watts to kilowatts: 1500/1000=1.51500 / 1000 = 1.5 kW. Daily energy is 1.5×2=31.5 \times 2 = 3 kWh, and over 30 days that is 90 kWh. The cost is 90×0.25=22.590 \times 0.25 = 22.5, so running the appliance costs 22.50 in your currency for the period.

Assumptions and limits

The calculation assumes the appliance draws the same power the whole time it runs. It excludes fixed monthly charges, taxes, tiered rates and time-of-use pricing. Hours per day cannot exceed 24. Devices that cycle on and off, such as refrigerators, need an average power figure rather than the nameplate rating.

Frequently asked questions

How do I find an appliance's wattage?

Check the label or nameplate on the device, its power adapter or its manual. That figure is usually the maximum draw, so a plug-in energy meter gives a more accurate average for devices whose power varies.

What is a kilowatt-hour?

A kilowatt-hour is a unit of energy equal to using 1,000 watts for one hour. Electricity bills are typically priced per kWh.

How much does a 1,500-watt space heater cost per hour?

It uses 1.5 kWh per hour at full power, so the hourly cost is 1.5 times your price per kWh. At 0.15 per kWh that is 0.225 per hour; heaters with thermostats often cycle and use less.

Do appliances use electricity when switched off?

Many devices draw a small standby power while plugged in. You can include it by entering the standby wattage and the hours per day the device spends in standby.

How much does it cost to run a 100 W TV for a month?

At 5 hours a day for 30 days, a 100 W TV uses 0.1×5×30=150.1 \times 5 \times 30 = 15 kWh. At 0.25 per kWh that costs 3.75 for the month. Modern TVs often draw less than their rated maximum, so a plug-in meter reading may lower the figure.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
power_wAppliance powernumber; allowed ≥ 0required
hours_per_dayHours per daynumber; allowed 0–24required
daysNumber of daysnumber; allowed ≥ 0required
price_per_kwhPrice per kWhamount without a currency symbol; allowed ≥ 0required

Examples

  • ?power_w=2000&hours_per_day=3&days=30&price_per_kwh=0.185

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="electricity_cost_calculator"]