About this tool
Kinetic energy is the energy an object has because it is moving. It equals the work needed to bring the object from rest to its speed, and the work it can do while slowing down, for example when a car's brakes turn it into heat.
Because speed is squared, it matters much more than mass: doubling the speed quadruples the kinetic energy, while doubling the mass only doubles it. This is why stopping distances grow so quickly with speed.
How it works
Choose Kinetic energy, Mass or Speed and enter the other two values. Mass can be in kg, g, t, lb or oz and speed in m/s, km/h, mph, ft/s or knots. The answer can be shown in joules, kilojoules, megajoules, calories, kilocalories, watt-hours, kilowatt-hours or foot-pounds.
The calculator converts everything to SI units, applies or one of its rearrangements, and , and converts the answer back. It also shows the momentum and the energy in every other unit.
Example
A 2 kg ball moving at 3 m/s has J.
A 1000 kg car at 100 km/h moves at about 27.78 m/s, so J, about 386 kJ. At 50 km/h the same car has a quarter of that energy, about 96 kJ.
Assumptions and limits
The calculator uses classical (Newtonian) mechanics, which is accurate for everyday speeds. Close to the speed of light the relativistic formula is needed, and the classical value is too low.
Only translational kinetic energy is included. A rolling wheel or a spinning flywheel also stores rotational energy, which depends on its moment of inertia and angular speed. The speed is measured relative to a chosen frame of reference, usually the ground.
Frequently asked questions
What is the formula for kinetic energy?
, with the mass in kilograms and the speed in meters per second giving the energy in joules.
How do I find the velocity from kinetic energy?
Rearrange the formula: . For 9 J and 2 kg, m/s.
Why does speed matter more than mass?
Kinetic energy grows with the square of the speed but only in proportion to the mass. A car at 60 mph has four times the kinetic energy it has at 30 mph.
Can kinetic energy be negative?
No. Mass is positive and the squared speed cannot be negative, so kinetic energy is zero for an object at rest and positive otherwise.
What is the difference between kinetic and potential energy?
Kinetic energy comes from motion; potential energy comes from position, such as height in a gravitational field, . A falling object turns potential energy into kinetic energy.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
solve_for | what to calculate: energy, mass, velocity; give the other 2 values | default energy |
energy_jKinetic energy (Eₖ) | number; any unit in the name: _j, _kj, _mj, _cal, _kcal, _wh, _kwh, _ft_lbf; allowed ≥ 0 j | give 2 of energy_j, mass_kg, velocity_m_per_s |
mass_kgMass (m) | number; any unit in the name: _mg, _g, _kg, _oz, _lb, _st, _ug, _t; allowed > 0 kg | give 2 of energy_j, mass_kg, velocity_m_per_s |
velocity_m_per_sSpeed (v) | number; any unit in the name: _m_per_s, _km_per_h, _mph, _ft_per_s, _kn; allowed ≥ 0 m_per_s | give 2 of energy_j, mass_kg, velocity_m_per_s |
Examples
?mass_kg=1500&velocity_km_per_h=100?solve_for=velocity&energy_kj=50&mass_kg=80
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="kinetic_energy_calculator"]