Time to Decimal Converter

Conversion direction

Use H:MM with two minute digits, or decimal hours with a dot or comma. Nonnegative durations up to 999,999 hours are supported. Conversion to minutes rounds to the nearest minute.

Decimal hours
Duration (H:MM)
7:30
hdecimal=h+m60h_{\mathrm{decimal}} = h + \frac{m}{60}

About this tool

This converter turns hours-and-minutes durations into decimal hours and back. Employees, freelancers and payroll staff use it when entering timesheets, billing hours or multiplying time by an hourly rate. Decimal hours express a duration as a single number of hours, where the fraction is minutes divided by 60, so 30 minutes is 30/60=0.530/60 = 0.5 hours.

How it works

Choose the direction, then enter a duration or decimal hours. Both formats update immediately. This tool handles elapsed time, not times of day. Decimal-to-duration conversion rounds to the nearest minute; displayed decimal hours use up to six decimal places.

Type durations as H:MM with two minute digits, such as 8:05 rather than 8:5. Decimal hours can use a dot or a comma, so 7.25 and 7,25 give the same result. To convert by hand, divide the minutes by 60; for the reverse, multiply the decimal part by 60 to get minutes.

Example

7:30 is 7.5 decimal hours. 1.75 hours is 1:45, not 1:75.

A few days of time entries show why the format matters. Shifts of 7:45, 8:20 and 6:50 add up to 22:55, which is 22 + 55/60 ≈ 22.916667 decimal hours. In the other direction, 2.33 hours is 2 hours and 19.8 minutes, which the converter rounds to 2:20.

Assumptions and limits

The tool converts nonnegative elapsed durations up to 999,999 hours, entered as H:MM or decimal hours with a dot or comma. It does not handle seconds, times of day, time zones or negative values. Converting decimal hours to H:MM rounds to the nearest minute, and no employer rounding rules, such as quarter-hour increments, are applied.

Frequently asked questions

Are 7.30 hours the same as 7:30?

No. 7.30 decimal hours is 7 hours 18 minutes. 7 hours 30 minutes is 7.5 decimal hours. Entering 7.30 on a decimal timesheet for seven and a half hours would record 12 minutes less than you worked.

Can I convert durations longer than a day?

Yes. For example, 40:30 is 40.5 hours. The converter does not wrap durations at 24 hours or apply payroll rounding policies.

How do I convert minutes to decimal hours?

Divide the minutes by 60 and add the result to the whole hours. For example, 8 hours 45 minutes is 8+45/60=8.758 + 45/60 = 8.75 hours.

How do I calculate pay from hours and minutes?

Convert the duration to decimal hours first, then multiply by the hourly rate. For example, 7:45 is 7.75 hours, so at a rate of 20 per hour the pay is 155 before taxes or deductions.

Why does my timesheet show 0.25 for 15 minutes?

Fifteen minutes is a quarter of an hour, and 15 ÷ 60 = 0.25. The other common quarter-hour values are 0.5 for 30 minutes and 0.75 for 45 minutes. Some employers round recorded time to these increments; this converter shows the exact value and leaves any rounding policy to you.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
modeConversion directionone of: duration, decimaldefault duration
hours_minutesDuration (H:MM)text in the tool's notation, see the examples; used with mode = durationrequired
decimal_hoursDecimal hoursnumber; allowed 0–999999; used with mode = decimalrequired

Examples

  • ?hours_minutes=38:45
  • ?decimal_hours=7.75

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="time-to-decimal"]