Velocity Calculator

View results · 10.4384 m/s

Inputs

Equation
Solve for

Use negative values for motion in the opposite direction. Speed is the size of the velocity without a direction.

Result

Average velocity (v̄)

In other units

  • 37.5783 km/h
  • 23.3501 mph
  • 34.2468 ft/s
  • 20.2907 kn
vˉ=ΔsΔt\bar{v}=\frac{\Delta s}{\Delta t}

Step by step

  1. Rearrange the formula for the unknown
    vˉ=ΔsΔt\bar{v}=\frac{\Delta s}{\Delta t}
  2. Substitute the values
    vˉ=1009.58≈10.4384 m/s\bar{v}=\frac{100}{9.58}\approx10.4384\,\text{m/s}

About this tool

Velocity is how fast an object's position changes and in which direction. Average velocity is the displacement, the straight-line change in position, divided by the time taken. Speed is the distance travelled divided by the time, without a direction.

The two differ whenever the path is not a straight line in one direction. A runner who finishes a 400 m lap where they started has run at about 5 m/s on average, but their average velocity is zero because the displacement is zero.

How it works

Choose Average velocity to use vˉ=Δs/Δt\bar{v} = \Delta s / \Delta t: enter two of displacement, time and average velocity. Choose Constant acceleration to use v=u+atv = u + a t: enter three of the initial velocity, acceleration, time and final velocity, and the calculator finds the fourth.

Displacement, velocity and acceleration are signed: pick one direction as positive and enter motion the other way as a negative number. Units can be mixed, for example kilometers and minutes, because every value is converted to meters and seconds first. With constant acceleration the calculator also gives the displacement s=u+v2 ts = \frac{u + v}{2}\,t.

vˉ=ΔsΔtv=u+at\begin{gathered}\bar{v}=\frac{\Delta s}{\Delta t}\\[0.6em]v=u+at\end{gathered}

Example

A sprinter covers 100 m in 9.58 s: vˉ=1009.58≈10.44\bar{v} = \frac{100}{9.58} \approx 10.44 m/s, about 37.6 km/h.

A car starts from rest and accelerates at 3 m/s² for 5 s: v=0+3×5=15v = 0 + 3 \times 5 = 15 m/s. Its displacement in that time is s=0+152×5=37.5s = \frac{0 + 15}{2} \times 5 = 37.5 m.

Assumptions and limits

The constant-acceleration mode assumes the acceleration does not change during the time interval, as for free fall without air resistance or steady braking. If the acceleration varies, split the motion into intervals or use calculus.

Both modes treat motion along a single straight line. For motion in two or three dimensions, apply the formulas to each component separately.

Frequently asked questions

What is the difference between velocity and speed?

Velocity has a direction and speed does not. Average velocity uses the displacement between the start and end points, while average speed uses the total distance travelled.

How do I calculate average velocity?

Divide the displacement by the time taken: vˉ=Δs/Δt\bar{v} = \Delta s / \Delta t. Moving 300 m east in 60 s gives 5 m/s east.

How do I find the final velocity with acceleration?

Use v=u+atv = u + a t: add the acceleration multiplied by the time to the initial velocity. From 10 m/s with 2 m/s² for 4 s, v=10+2×4=18v = 10 + 2 \times 4 = 18 m/s.

What does a negative velocity mean?

It means the object moves in the direction you defined as negative. A negative acceleration with a positive velocity means the object is slowing down.

What units does the calculator use?

You can enter displacement in m, km, cm, mi or ft, time in seconds, minutes or hours, velocity in m/s, km/h, mph, ft/s or knots and acceleration in m/s² or ft/s². The working is shown in SI units.

Link with your values

Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.

ParameterValueIf omitted
solve_forwhat to calculate: displacement, elapsed, average_velocity, final_velocity, initial_velocity, acceleration, time; give the other values of its formuladefault average_velocity
displacement_mDisplacement (Δs)number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmigive 2 of displacement_m, elapsed_s, average_velocity_m_per_s
elapsed_sTime taken (Δt)number; any unit in the name: _s, _min, _h; allowed > 0 sgive 2 of displacement_m, elapsed_s, average_velocity_m_per_s
average_velocity_m_per_sAverage velocity (v̄)number; any unit in the name: _m_per_s, _km_per_h, _mph, _ft_per_s, _kngive 2 of displacement_m, elapsed_s, average_velocity_m_per_s
final_velocity_m_per_sFinal velocity (v)number; any unit in the name: _m_per_s, _km_per_h, _mph, _ft_per_s, _kngive 3 of initial_velocity_m_per_s, acceleration_m_per_s2, time_s, final_velocity_m_per_s
initial_velocity_m_per_sInitial velocity (u)number; any unit in the name: _m_per_s, _km_per_h, _mph, _ft_per_s, _kngive 3 of initial_velocity_m_per_s, acceleration_m_per_s2, time_s, final_velocity_m_per_s
acceleration_m_per_s2Acceleration (a)number; any unit in the name: _m_per_s2, _ft_per_s2give 3 of initial_velocity_m_per_s, acceleration_m_per_s2, time_s, final_velocity_m_per_s
time_sTime (t)number; any unit in the name: _s, _min, _h; allowed ≥ 0 sgive 3 of initial_velocity_m_per_s, acceleration_m_per_s2, time_s, final_velocity_m_per_s

Examples

  • ?displacement_km=42.195&elapsed_h=2.1
  • ?initial_velocity_m_per_s=0&acceleration_m_per_s2=9.81&time_s=3
  • ?solve_for=acceleration&initial_velocity_km_per_h=0&final_velocity_km_per_h=100&time_s=6.5

Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.

Result elements: [data-result-block="velocity_calculator"]