About this tool
Mulch keeps soil moist, evens out its temperature and holds back weeds, but only at the right depth. Extension services generally recommend 2–4 in (5–10 cm) of organic mulch: a thinner layer lets weeds through, while a much thicker one can starve roots of air and keep the soil too wet.
One cubic yard of mulch covers about 108 ft² at 3 in deep and fills 13.5 bags of 2 cu ft. Bulk mulch is usually cheaper once a project needs more than a couple of cubic yards, while bags are easier to carry and store for small beds and top-ups.
How it works
Measure each bed as a rectangle, circle or triangle and enter how deep you want the mulch, usually 2–4 in (5–10 cm). The calculator adds the beds together, multiplies the area by the depth and converts the volume into cubic yards (or cubic metres) and bags.
Bagged mulch is usually sold in 2 or 3 cu ft bags in the US and in 50 or 70 L bags elsewhere; choose the size you plan to buy. Enter a bulk price per cubic yard, a price per bag or both to see which is cheaper for your project. An extra 5–10% covers settling and uneven beds.
Example
Two beds, one 20 ft × 4 ft and one circle 6 ft across, have a total area of ft². At 3 in deep, the volume is ft³, almost exactly 1 yd³.
With 5% extra, you need about 1.05 yd³: 15 bags of 2 cu ft or 10 bags of 3 cu ft. At $4.50 per 2 cu ft bag, the bags cost $67.50. Bulk mulch at $35 per cubic yard costs about $37, but once a delivery fee is added, bags can still be the cheaper choice for a single yard.
Mulch coverage tables
Coverage per cubic yard and per bag
| Depth (in) | Per cubic yard (ft²) | Per 2 ft³ bag (ft²) | Per 3 ft³ bag (ft²) |
|---|---|---|---|
| 1 | 324 | 24 | 36 |
| 2 | 162 | 12 | 18 |
| 3 | 108 | 8 | 12 |
| 4 | 81 | 6 | 9 |
Coverage per cubic metre and per bag
| Depth (cm) | Per cubic metre (m²) | Per 50 L bag (m²) | Per 70 L bag (m²) |
|---|---|---|---|
| 2.5 | 40 | 2 | 2.8 |
| 5 | 20 | 1 | 1.4 |
| 7.5 | 13.3 | 0.67 | 0.93 |
| 10 | 10 | 0.5 | 0.7 |
Bags per cubic yard and per cubic metre
| Bag size | Bags per yd³ | Bags per m³ |
|---|---|---|
| 2 ft³ | 13.5 | 17.7 |
| 3 ft³ | 9 | 11.8 |
| 50 L | 15.3 | 20 |
| 70 L | 10.9 | 14.3 |
Coverage is the volume divided by the depth, without any allowance for settling.
Assumptions and limits
Mulch shrinks as it settles and breaks down, so beds usually need a top-up every year or two rather than a full new layer. If old mulch remains, enter only the depth you want to add. Bag sizes are nominal: bagged mulch may be packed loose or slightly compressed, and bulk mulch is measured loose.
Keep mulch a few inches away from tree trunks and plant stems, and avoid piling it into volcano shapes around trees, which can lead to rot and pests. The calculator estimates quantities only and assumes an even depth across each bed.
Frequently asked questions
How many bags of mulch are in a cubic yard?
A cubic yard is 27 ft³, so it equals 13.5 bags of 2 cu ft or 9 bags of 3 cu ft. In metric units, a cubic metre fills 20 bags of 50 L or about 14.3 bags of 70 L.
How deep should mulch be?
Usually 2–4 in (5–10 cm). Use the lower end for fine materials and the upper end for coarse wood chips, which let more air through. When topping up an existing layer, 1–2 in is often enough.
How much area does a cubic yard of mulch cover?
About 162 ft² at 2 in, 108 ft² at 3 in and 81 ft² at 4 in. A 2 cu ft bag covers 12 ft² at 2 in or 8 ft² at 3 in.
Is bulk mulch cheaper than bags?
Per cubic yard, usually yes, but delivery fees and minimum orders change the picture for small jobs. Enter both prices to compare them for your area. Bags are also easier to store and avoid a large pile on the driveway.
Can I use this calculator for compost, bark or rubber mulch?
Yes. Volume and bag counts depend only on the area and depth, so they apply to any loose material sold by volume, including compost, bark and rubber mulch. For stone sold by weight, use the Gravel Calculator.
Link with your values
Add these parameters to this page’s address to open it with the values filled in, for example to share a calculation or to link to it from an AI assistant. The result is calculated in the browser: the page HTML shows an example for the default values, and the tool sets the data-url-params attribute once the link’s values are applied.
| Parameter | Value | If omitted |
|---|---|---|
units | metric or imperial | set by the first measured value |
currency | ISO 4217 code, for example USD or EUR | your saved or detected currency |
depth_cmdepth_inDepth | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 300 cm (metric), > 0 – 118.11 in (imperial) | required |
waste_pctExtra allowance | percent: 6.5 means 6.5%; allowed 0–100 | default 5 |
bag_size_ft3Bag size | one of: 2, 3 | default 2 |
bag_size_lBag size | one of: 50, 70 | optional |
bag_pricePrice per bag | amount without a currency symbol; allowed 0–10000000 | optional |
price_per_m3price_per_yd3Price per cubic yard | amount without a currency symbol; a time per unit in the name: _per_ml, _per_l, _per_m3, _per_tsp, _per_tbsp, _per_fl_oz, _per_fl_oz_uk, _per_cup, _per_pt, _per_qt, _per_gal, _per_gal_uk, _per_in3, _per_ft3, _per_yd3, _per_ul, _per_cm3; allowed 0–1000000000 /m3 (metric), 0–1000000000 /yd3 (imperial) | optional |
| Parameter | Value | If omitted |
|---|---|---|
area1_shapeShape | one of: rectangle, circle, triangle | counted as rectangle |
area1_length_ftLength | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = rectangle | required |
area1_width_ftWidth | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = rectangle | required |
area1_diameter_ftDiameter | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = circle | required |
area1_base_ftBase | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = triangle | required |
area1_height_ftHeight | number; any unit in the name: _mm, _cm, _m, _km, _in, _ft, _yd, _mi, _nmi; allowed > 0 – 32808.4 ft; used with area1_shape = triangle | required |
Examples
?area1_length_ft=40&area1_width_ft=3&depth_in=3&bag_size_ft3=3&bag_price=4.5?currency=EUR&area1_shape=circle&area1_diameter_m=4&depth_cm=7&bag_size_l=70&price_per_m3=55
Write decimals with a point. Encode a space as %20, + as %2B, # as %23 and & as %26.
Result elements: [data-result-block="material"]